Responsive Menu
Add more content here...
Ateva Technologies

PROFINET : THLink Profinet

Diagnostic PROFINET : Indépendant du contrôleur

L’outil de diagnostic THLink PROFINET est totalement indépendant du contrôleur. Il permet le « monitoring » des réseaux PROFINET.  Les données sont collectés dans des réseaux comprenant jusqu’à 254 Noeuds et mise à la disposition des utilisateurs via le logiciel THScope. THLink PROFINET facile d’utilisations’intègre facilement sans intéraction avec le fonctionnement de l’installation existante.

Général

Independent Access to PROFINET Network

  • Controller-independent
  • Independent of configuration tools
  • Only one tool needed to monitor multiple IP subnetworks (up to 254 nodes, one or more controllers)

Designed for Installation without Interference with Plant Operation

  • Connection to free port in PROFINET network, also possible during operation of the plant
  • No need to install TAPs or use mirror ports
  • Highest security (separate accesses for control room level and plant level, no routing)
  • Easy integration into existing plants thanks to compact design

Powerful Data Collection Capabilities Optimized for PROFINET

  • Collection from PROFINET devices and other nodes (e.g. PCs or camera systems)
  • PROFINET supervisor in PROFINET networks
  • Network load limit according to PROFINET guidelines

Optimized for Use by Maintenance Engineers

  • Suitable for network acceptance testing, continuous monitoring and troubleshooting
  • Easy and intuitive handling and operation
  • Fault identification with intelligent troubleshooting assistance
  • Seamless integration with TH SCOPE diagnostics software

Détails techniques

Functionality
  • Network detection and data collection (active/passive for PROFINET Networks)
  • Alarm notification in case of fault
  • Basic monitoring, configuration
  • Integrated web server
Input Voltage24 VDC (18 VDC … 32 VDC)
Current consumptionmax. 180 mA
Current consumption relay contactmax. 100 mA
Operating Temperature-40 °C … +75 °C
Relative Air Humidity5 … 95 % (no condensation)
Ethernet PortsRJ-45 (10Base-T/100Base-TX)
Supported SD CardsSee Release Notes
Mounting35 mm DIN rail
Dimensions (HxWxD)22.5 x 99 x 114.5 mm
Weight120 g
CertificationsCE

Numéro de référence

GDA-JA-003034TH LINK PROFINET

Scope of Delivery

HardwareTH LINK PROFINET
DocumentationInstallation Manual, Release Note (by download)

Additional Products and Services

LRA-JY-003024TH SCOPE (software key)
LRL-JY-003025TH SCOPE (hardware key)
LRA-JY-003028TH LINK PC Industrial Ethernet (software key)
LRL-JY-003029TH LINK PC Industrial Ethernet (hardware key)
GDA-JY-003037TH LINK Industrial Ethernet
TRA-PN-TECHTraining “PROFINET Technology”
TRA-PN-CERTENGTraining “PROFINET Commissioning and Troubleshooting”

Wiki

TH LINK:
enablement of the following ports:

  • HTTP Protocol:      80 TCP
  • Firmware update: 1100 TCP
  • communication with each other:    1123, 1124, 2364 UDP
  • communication with TH SCOPE via Multicast:  2364 UDP
  • communication with TH SCOPE via Unicast:    1151, 2365 UDP

There must be no firewall between the TH LINK and the PROFINET and/or EtherNet/IP devices.

TH SCOPE:
If your network is protected by a second firewall in addition to the Windows firewall, make sure that the following settings are made to allow TH SCOPE services to communicate properly.

  • Enabling of HTTP port 80 – inbound and outbound
  • Enabling of SNMP port 161 inbound or port 2367 (if port 161 is used by another SNMP agent).
  • Enabling of IP 224.0.5.128 port 2364 UDP outbound
  • Enabling of UDP ports 2365 outbound and 2366 inbound

 

The following ports are used by TH SCOPE for internal communication only:

  • Port 22
  • Port 80
  • Port 1100
  • Ports 1123 – 1151
  • Port 1500
  • Port 1501
  • Ports 2363 – 2366
  • Ports 49152 – 49171

Produits qui pourrait vous intéresser